A one-part polymer-based adhesive for fixing mirrors and glazed products. Ready to use, non-corrosive and odorless, it has outstanding resistance to heat and humidity and needs no primer.
Uses: for the internal bonding of mirrors, glazed surfaces, ceramics, enamel, metals, PVCu, polycarbonate and treated or untreated wood to most common substrates. Quick-curing, with excellent adhesion, this product is for internal use and can be applied to wet surfaces. Please note that large mirrors may need mechanical fixing - if in doubt, please refer to our technical datasheet. Mirror Pro is not suitable for use with safety mirrors.
Instructions: Ensure all surfaces are clean from grease, oil or any other contaminants that may hinder adhesion. Carefully cut the tip of the cartridge, taking care not to damage the threaded area. Cut off top of nozzle at an angle of approximately 45° to an opening of approximately 1/4". Screw on nozzle and place cartridge in a standard sealant gun. For glass thickness of 1/8" apply a 1/4" bead of adhesive at 2" intervals. Place the mirror in position and apply even pressure. Provide temporary support (eg. tape) while the adhesive cures. The edges of the mirror can also be sealed with Mirror Pro if required but leave 24 hours after fixing. For glass thicknesses above 1/8", mirrors greater than 10 square-feet or mirrors on ceilings or sloping walls, Mirror Pro must be used in conjunction with mechanical fixings. Do not use Mirror Pro with safety mirrors.
Storage: Store in cool, dry conditions between 41°F (5°C) and 77°F (25°C).
Shelf Life: Use within 12 months.
Warranty: Manufacturer warrants the performance of this product when used as directed for 10 years from date of purchase. Call (702) 953-0968 with your sales receipt and product container for replacement product or sales price refund. Manufacturer nor reseller will be held liable for incidental or consequential damages.
Safety Data Sheet